HOUSE OF MOLDS rubber moulds are hand made supplies , suitable for the reproduction of various different casting and clay materials: polyester , epoxy or polyurethane resins, plaster, marmorean,wax and polymer clays like Fimo and Cernit,concrete ,Pmc ,and many more.

We are a couple of artisan and we make every mold just for you.
Please note that every mold is handmade,the external shape of the molds and the molds color may vary. 
If you have any question about how to use your resin, we will be happy to help you,but remember to always follow your resin manufacturer's instructions as you prepare the resin.

***Handmade designs and shapes could have some little works signs that could be reproduced also in your resin creations ,this are cause the handwork needed to create the shapes we use to make the molds.This guarantee that our molds reproduce handmade jewelry so you can make very special resin pieces from them,the small imperfections can easily be removed by sanding and buffing .
The handmade works signs ,will not affect the smoothness or the glossy surface of your resin creations.***

MORE DETAILED INSTRUCTIONS WILL BE SENT BY MESSAGE AFTER YOU PURCHASE YOUR MOLDS.

GENERAL INFOS:

-Carefully read your Resin Brand Instructions to know how to mix your resin components, curing time or other technical details ,cause every Resin Brands could have different features.

-Mix and pour your Resin according to your Resin Brand instructions.

- HOUSE OF MOLDS Standard and Clear Rubber molds are not food grade.

-No need for a releasing agent. ( if not required to your Resin brand)

-If your Resin Brand require to use a releasing agent with silicone molds,please be sure that the Releasing agent dont contain Petroleum based substances to not damage the internal surface of Clear molds.

-HOUSE OF MOLDS rubbers are non-stick

-The rubber is absolutely no-toxic and hypoallergenic but not edible.

-After any pouring ,Wash your mold carefully with neutral soap and mild water.

(please do no use hot water)

-Store your molds in close container , to keep the molds away from dust or direct sunlight.


STANDARD RUBBER MOLD(coloured -non clear)INSTRUCTION: 

-Please always read your resin productor instruction for detail,before to use the silicone molds

-No need for a releasing agent for most kind of resin

-The rubber is absolutely no-toxic and hypoallergenic but not edible.

- Wash your mold carefully with soap and water,put it away from dust.

-The rubber is resistant up to 200° C permitting the casting of wax.

-The Standard rubber can be heated at a max temperature of 30 C°(celsius)
for max 24 hours at time.

°°°°°°°°°°°°°
INSTRUCTIONS ABOUT CLEAR RUBBER MOLDS:

-Please always read your resin productor instruction for detail,before to use the clear silicone molds.

-No need for a releasing agent for most kind of resin(some resin brands suggest to use a releasing agent with silicone molds)

-Natural Wax releasing agent are safe if used with Clear molds.

-Petroleum Based Releasing agent could also cause a quick whitening of your clear molds.

-The rubber is absolutely non-toxic and hypoallergenic but not edible.

-After any pouring ,Wash your mold carefully with neutral soap and mild water.

-Never scrub your mold with abrasive sponges or sharp tools .

-Store your molds in close container , to keep the molds away from dust or direct sunlight.

°°°°